Types of Foundations

  • private houses

The foundation is one of a structure's most important elements. It transfers the building's loads to the ground, protects against ground movement and damp, and provides a stable base that helps reduce vibration and mechanical stresses on the house as a whole. In the simplest classification, foundation types are classified according to the load they carry: the building's weight and intended use. Ground conditions and the construction budget also influence the choice of foundation.

Foundations for Lightweight Structures

Our overview of foundation types begins with pile foundations. Their main characteristic is the transfer of loads through both weaker and stronger ground layers. They can accommodate different load levels and are suitable for northern regions. Steel screw piles are commonly used in private low-rise construction.

These structures offer a low cost and quick installation without complex calculations.

Drawbacks include a shorter service life due to susceptibility to corrosion, and a limited range of applications: relatively small, lightweight structures such as single-storey timber-frame houses and outbuildings.

Types of Concrete Foundations

When discussing the types of foundations available in construction, pier foundations also deserve attention. They consist of a system of columns supported on monolithic footings. These load-bearing elements have a broad range of uses, from low-rise and industrial buildings to apartment blocks. Foundation depth depends on the building type and may reach three metres. The main difficulty lies in calculating the design loads. Shallow pier foundations are generally used in private house construction.

Applications:

● framed buildings where loads are transferred at individual points;

● sites with strong bearing ground;

● small-scale projects with limited structural demands.

Advantages:

● low cost;

● relatively straightforward construction.

Drawbacks:

● the absence of ties between the piers requires reinforcement or separate calculations for each footing;

● sensitive to ground conditions.

Continuing our overview of foundation types for private houses, strip foundations are a popular option. They generally follow the outline of the load-bearing walls, forming a continuous strip of a specified width, most of which lies within a trench. The bearing surface remains above ground, with its level determined in relation to groundwater conditions. Foundation depth is specified in the building design. A strip foundation can also form the walls of a basement.

Benefits:

● a large bearing area distributes the building's load more evenly over the ground;

● helps accommodate settlement;

● straightforward design.

Disadvantages:

● a higher cost than pier foundations because more material is required;

● reinforcement enables the monolithic structure to resist the design loads;

● unsuitable for concentrated loads, which may cause failure and effectively turn the strip into separate footings;

● specialised equipment is needed to excavate narrow trenches, or a substantial amount of manual work is required.

Foundations can carry and distribute heavy building loads by increasing their bearing area, reinforcing them and using advanced construction techniques.

As modern construction technology has developed, widespread use has been made of foundation types, including raft foundations. These continuous structures follow the full footprint of the building and require careful site preparation. Reinforcement is necessary to resist substantial stresses. Their depth depends on the design, the presence of a basement and changes in the site's ground level.

Benefits:

● suitable for a wide range of site conditions;

● among the most reliable and stable foundation types;

● support contemporary architectural solutions such as large areas of glazing and cantilevered elements;

● helps accommodate building settlement;

● they also form the base of the basement.

Disadvantages:

● structural calculations are required;

● a higher cost than steel-pile and pier foundations.

Enquire about a project

Send an enquiry to arrange a consultation and discuss your project